Techno-economic feasibility of methanol synthesis using dual fuel system in a parallel process design configuration with control on green house gas emissions

Recently, the methanol production has received a lot of attraction in the process industries due to its wide applications in the synthesis of many commercial chemicals and fuels. Most of the coal to methanol processes suffers from higher water consumption, greenhouse gas (GHG) emissions and lower yields. The aim of this study is to develop a novel energy efficient and economic viable process that may not only increase the methanol production capacity but also offers the less energy requirements with improved process economics. In this study, coal gasification process is sequentially integrated in the parallel design configuration with the natural gas reforming technology to enhance the heating value of the resulting syngas for methanol production. To achieve this aim, two case studies have been developed and compared in terms of overall process performance and economics. Case 1 represents the conventional coal to methanol process, whereas, case 2 represents the conceptual design of integrating the gasification and reforming technologies for enhanced methanol production. The process efficiencies calculated for case 1 and case 2 is 63.2% and 70.0%, respectively. It has been seen from results that the methanol production energy for case 1 and case 2 is 0.69 kg/W and 0.76 kg/W, respectively. In terms of process economics, the methanol production cost for case 1 and case 2 has been estimated as 250 €/tonne and 234 €/tonne, respectively. The comparative analysis showed that the case 2 design not only offers higher process performance but also enhances the process feasibility compared to the conventional coal based processes.     

NH2-MCM-41的改性及其pH响应性释药的研究

采用正硅酸乙酯（TEOS）和3-氨丙基三乙氧基硅烷（APTES）通过共缩聚法合成介孔二氧化硅（MCM-41）。首先对其氨基修饰，再通过有机合成接枝—R基团（—R：—CHO、—OH、—CH₃、—COOH），制备得到Me-Ph-NH-MCM-41、OHC-Ph-NH-MCM-41、HO-Ph-NH-MCM-41、HOOC-Ph-NH-MCM-41四种不同的药物载体。利用FT-IR、Zeta电位、XRD和SEM对其结构和形貌表征，结果表明NH₂-MCM-41改性成功。以罗丹明B（RhB）为模型进行载药性能测试，并考察了此释药系统在模拟不同pH的体液下的敏感释药行为，同时探究了不同—R基团对释药的影响。结果显示，四种载体在中性条件下几乎不发生药物释放，通过改变环境体系pH可以有效控制药物释放，其释药行为可以用Korsmeyer-Peppas动力学模型来描述。实验表明，释药量：RhB@HOOC-Ph-NH-MCM-41>RhB@OHC-Ph-NH-MCM-41>RhB@HO-Ph-NH-MCM-41>RhB@Me-Ph-NH-MCM-41，不同—R基团的药物载体的pH响应性不同，其中RhB@HOOC-Ph-NH-MCM-41释药量在pH=1.2时可达57.87%，在用于药物智能控释材料方面具有一定的应用潜力。     

New titanium (III) phosphite structure and its application as anode for lithium ion batteries

A new titanium (III) phosphite Ti₂(HPO₃)₃, has been synthesized under hydrothermal conditions. The solid-state structure of this material was solved using single-crystal X-ray diffraction. The anionic inorganic skeleton has a three-dimensional structure, which is built up by TiO₆ octahedral units linked together via bridging HPO₃ pseudo pyramids, giving rise to tunnels along the three crystallographic axes. This new compound displays a high thermal stability limit of 625 °C. IR and Raman spectroscopies show the vibrational modes of the (HPO₃)²⁻oxoanions. Electrochemical activity of this phase toward reversible insertion of Li ion was studied for the first time by galvanostatic charge-discharge measurements, an insertion host for reversible accommodation of Li⁺ was observed.     

MoS2-mesoporous LaFeO3 hybrid photocatalyst: Highly efficient visible-light driven photocatalyst

Perovskite type materials have high potential photocatalytic application towards both hydrogen energy generation and organic dye degradation due to their high stability and good reusability. Here, it is the first analysis of photocatalytic degradation of RhB and hydrogen energy evolution under visible light over MoS₂/LaFeO₃ nanocomposite. The physicochemical properties of the materials were characterized using a range of techniques such as XRD, TEM, XPS, FTIR, PL, photocurrent, etc. The optical properties of the nanocomposite show good absorption in UV-Vis spectra as compared to the bare LaFeO₃. In this study, MoS₂/LaFeO₃ nanocomposite was synthesized through single step in situ hydrothermal processes with a narrow bandgap, enhanced photocatalytic application under visible light. This novel MoS₂/LaFeO₃ nanocomposite is an efficient and promising photocatalyst for both hydrogen energy evolution and organic dye degradation.     

Enhanced photoelectrochemical water splitting using gadolinium doped titanium dioxide nanorod array photoanodes

In this study highly oriented, rutile phase one dimensional Titania nanorod array (TiO₂ NRA) modified by gadolinium doping were synthesized on the conductive glass substrate (FTO) by the hydrothermal method. The effect of Gd doping on the photoelectrochemical performance of TiO₂ NRA was investigated. Crystal phase, structural, morphological and composition characteristics of these synthesized photoelectrodes were analyzed by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive spectroscopy (EDS), and atomic force microscopy (AFM). FE-SEM images clearly show that some of the Gd dopant is uniformly distributed on the surface of TiO₂ NRA in the form Gadolinia (Gd₂O₃) microsphere. These gadolinia microsphere play an important role in reducing the surface recombination of electron and hole supported by photoluminescence's studies. Linear sweep voltammetry results show that Gd doping results in a two-fold increase in photocurrent density as compared to pristine TiO₂ NRA. UV–visible spectra, and Mott-Schotty measurements show that Gd doping shift the flat-band potential of TiO₂ NRA more toward negative potential that results in effective charge separation and transportation in the Gd doped TiO₂ NRA (Gd@TiO₂ NRA). Applied biased photon to current efficiency (ABPE) equation was used to find solar to hydrogen efficiency (STH). Gd@TiO₂ NRA show optimum conversion efficiency of ~0.64% at 0.03 V vs Ag/AgCl, while pristine TiO₂ NRA display ~0.33% at −0.21 V vs Ag/AgCl.     

ZnIn2S4/In(OH)3 hollow microspheres fabricated by one-step l-cysteine-mediated hydrothermal growth for enhanced hydrogen production and MB degradation

An intervening barrier for photocatalytic water decomposition and pollutant degradation is the frustratingly quick recombination of e⁻ - h⁺ pairs. Delicate design of heterojunction photocatalysts by coupling the semiconductors at nanoscale with well-matched geometrical and electronic alignments is an effective strategy to ameliorate the charge separation. Here a facile and environment-friendly l-cysteine-assisted hydrothermal process under weakly alkaline conditions is demonstrated for the first time to fabricate ZnIn₂S₄/In(OH)₃ hollow microspheres with intimate contact, which are verified by XRD, SEM, (HR)TEM, XPS, N₂ adsorption-desorption, UV–Vis DRS and photoluminescence spectra. ZnIn₂S₄/In(OH)₃ heterostructure (L-cys/Zn²⁺ = 4, molar ratio) with a band-gap of 2.50 eV, demonstrates the best photocatalytic performance for water reduction and MB degradation under visible light, outperforming its counterparts (In(OH)₃ and ZnIn₂S₄). The excellent activity of ZnIn₂S₄/In(OH)₃ heterostructure arises from the intercrossed band-edge positions as well as the unique hollow structure with large surface area and wide pore-size distribution, which are beneficial for the efficient charge migration from bulk to surface as well as at the interface between ZnIn₂S₄ and In(OH)₃. This work provides an efficient and eco-friendly strategy for one-pot synthesis of heterostructured composites with intimate contact for photocatalytic application.     

An interval observer for uncertain continuous‐time linear systems

To design robust interval observers for uncertain continuous‐time linear systems, a new set‐integration approach is proposed to compute trajectory tubes for the estimation error. Because this approach, the order‐preserving condition on the dynamics of the estimation error is no longer required. Therefore, synthesis methods can be used to compute observer gains that reduce the impact of the system uncertainties on the accuracy of the estimated state enclosures. The performance of the proposed approach is showcased through illustrative numerical examples.     

高温固定流化床费托合成技术及其产物加工路线

与采用低温费托合成主产油品技术相比，产品更为多元化和高值化的高温费托合成技术在目前市场环境下显示出非常明显的优势。本文综述了高温费托合成技术的发展历程及其最新进展，重点介绍了高温费托合成过程中的核心问题，主要包括高温费托合成工艺、固定流化床反应器、费托合成催化剂；介绍了高温费托合成产物分布与特性，讨论了高温费托合成产物的加工路线，并对高温费托合成煤间接液化的工业应用前景和产业化方向进行了展望。结果表明：高温费托合成技术具有产物附加值高、兼顾油品和化学品、技术发展成熟等优势，产物中轻组分含量高、碳数分布较窄、高附加值的α-烯烃含量高；精细化、高端化、差异化加工是实现高温费托合成产物高值化利用的关键。     

Investigation of flame spray synthesized La1-xSrxCoO3 perovskites with promotional catalytic performances on CO oxidation

To enhance the activity of catalysts for CO removal, the perovskite-type catalysts La_1-xSr_xCoO₃ (x = 0, 0.2, 0.4, 0.6, and 0.8) with different Sr²⁺ doping amount were synthesized by flame spray synthesis (FSS) method. The perovskite-type catalyst synthesized by FSS has a much larger specific surface area (SSA) than that prepared by other conventional methods. The SSA of catalyst increases with the increase of Sr²⁺ doping amount and the SSA of La_0.2Sr_0.8CoO₃ reaches 31.65 m²/g. Compared with other conventional methods, FSS method significantly improves the activity of catalyst and makes it close to the performances of catalysts with surface modification. The substitution of La³⁺ by Sr²⁺ promotes the generation of secondary phase Co₃O₄ and SrCO₃. The catalytic activity of La_1-xSr_xCoO₃ increases with the addition of Sr²⁺, which results from the increasing active sites and oxygen vacancies. Interestingly, La_0.4Sr_0.6CoO₃ performs the highest activity for CO oxidation and the CO conversion reaches 50% at 148.6 °C and 90% at 165.9 °C. The oxidation of CO over La_1-xSr_xCoO₃ catalyst may follow a combination of MvK and L-H mechanisms according to the experimental results of H₂-TPR. Moreover, the catalyst exhibits good catalytic activity in consecutive oxidation cycles. In consecutive oxidation experiments with La_0.4Sr_0.6CoO₃, the CO conversion reaches 50% at 168.8 °C and 90% at 197.8 °C in the eighth oxidation cycle. These results prove that FSS method can further improve the activity of catalysts and is suitable for the preparation of efficient catalysts.     

Microstructure and Mechanical Properties of Cu Matrix Composites Reinforced byTiB2/TiN Ceramic Reinforcements

Cu matrix composites reinforced by TiB₂/TiN ceramic reinforcements (Cu/TBN composites) were prepared by hot pressing method. Prior to the hot pressing, Cu/TiB₂/TiN composite powders (CTBN powders), which were used as the starting materials of Cu/TBN composites, were fabricated by self-propagating high-temperature synthesis method. The CTBN particles were found to be in a special core-shell structure with a Cu-Ti alloy core and a TiB₂/TiN ceramic shell. The test results presented obvious improvements in mechanical properties. The highest ultimate tensile strength reached up to 297 MPa, 77 MPa higher than that of Cu. And the highest hardness reached up to 70.7 HRF, 15.7 HRF higher than that of Cu. A comparative study indicated that the core-shell structured particles could bring about more obvious strengthening effect than the traditional irregularly shaped particles, which was due to the improved Cu/ceramics interfacial bonding, the linkage strengthening effect of both TiB₂ and TiN, and higher load bearing ability of the core-shell structured reinforcements.